Product introduction
TA120 series axial electric control valve,consists of electric actuator and main valve body,the electric actuator can change the position of the valve core by receiving the control signal output by the control unit, and then adjust the medium flow, pressure and other technical parameters. It is widely used in gas distribution system, gas pipe network and industrial gas pressure regulating system.
Technical parameter
Nominal size | NPS2～20 |
Nominal pressure | Class600、900 |
Body material | A352 LCC 、A350 LF2 |
Suitable temperature | -20℃～+70℃ |
Leakage | In accordace to FCI-70-2，IECB 60534-4BⅣ，VI |
Product standard | IEC 60534 |
Travel variability | ≤±1% |
Rangeability | 100:1 |
Suitable medium | Natural gas, liquefied petroleum gas, petroleum and liquefied chemicals |
Product feature
1.Axial design
①Less internal resistance
②Higher capacity
③Lower noise less vibrations and turbulence
④Long maintenance period
2.Valve core pressure balance design
①Low operating torque/thrust
②Resistance to medium scour
③Zero leakage
④The balanced plug design results in a differential pressure independent of operating thrust,make the valve smooth
3.Sleeve unique design
①Good control ability with high range ability
②Higher capacity
③Reduce wear and vibration
④Diversity selection
⑤Axial control valves are equipped with a cage provided with multiple holes uniformly distributed over the full circumference. This design combined with the axial flow body concept ensures that the fluid is evenly distributed.
4.Safety design with grease injection, pressure relief, fire prevention, etc.
